• Car Audio » |  • Alpine Car Audio » |  • Amplifiers 2ch » |

Product Description:

General
1/2 Channel Operation
BassEngine®
Subsonic Filter
Bass EQ Circuit
Crossover (HP/LP)
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
Double Buffered Pre-Amp Input Circuitry
STAR Circuitry
MultiMode™
Top Mounted Blue LED Power/Status Indicator
Duo B Feedback Circuitry
Continuously Adjustable Gain Control
Speaker Level Inputs
Gold Plated Power Screw Terminals
Gold Plated Speaker Terminals
Cross-Vented Chassis Design
SPECIFICATIONS
CEA-2006 Power Rating
CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 50W x 2
RMS Power (at 14.4V THD+N, 20Hz-200Hz)
Per channel into 4 ohms: 50W x 2 (0.08% THD)
Per channel into 2 ohms: 70W x 2 (0.3%)
Bridged 4 ohms: 140W x 1 (0.3%)
BassEngine® Sound Tuning
Crossover Network: 18dB/oct
Low/High Pass Crossover Frequency (Fixed): 80Hz
Subsonic Filter (Fixed): 20Hz
Bass EQ Frequency (Fixed): 50Hz
Bass EQ Level (Selectable): 0 - 12dB (1dB Step)
General
Power Requirements: 14.4V DC (11V to 16V)
Frequency Response: 10Hz - 50Hz (+0,-1dB)
Signal to Noise (S/N): 100dBA (referenced to rated power)
Input Sensitivity (For Rated Power): 0.2V to 4.0V
Slew Factor: Greater than 5
Input Impedance: 10k Ohm
Speaker Impedance: 4 or 2 Ohm (Stereo), 4 Ohm (Bridged)
Heat Sink (WxHxD) in: 9-1/2" x 2-5/16" x 6-13/16"
Heat Sink (WxHxD) mm: 241mm x 60mm x 172mm
Foot Print (WxHxD) in: 9-1/2" x 2-5/16" x 8-1/8"
Foot Print (WxHxD) mm: 241mm x 60mm x 206mm
Dimensions: 206mm x 60mm x 242mm
Weight: 1.88 Kg.

Built-in crossover
In multi-speaker systems, it is important to make sure each speaker is sent only those frequencies it is designed to reproduce. This built-in crossover removes overlapping frequencies, ensuring greater efficiency, less strain—and a louder, cleaner sound.

Non-fading Preouts
The four-channel amp has independent RCA inputs for each channel. Internally, these are summed for the right and left signals to provide non-fading outputs for applications such as a separate subwoofer amp.

DC-DC Converter power supply
The power supply uses MOSFET circuitry to convert battery voltage to the voltages needed for high amplification. The result is higher power and much wider dynamic range.

Speaker-level inputs
These terminals allow direct connection to factoryinstalled head units that don’t have preamp outputs, letting you add subwoofers to any system.

Adjustable Bass EQ
This processing circuit provides optimum low frequency response, letting you adjust the bass for maximum clarity.

V-Power High-grade Components
The rugged, road-worthy V-Power amplifiers deliver exceptionally high performance and provide detailed control. Available in mono, two-channel and four-channel configurations, these amps are as powerful as they are versatile.