• Car Audio » |  • Alpine Car Audio » |  • Amplifiers D-class » |

Product Description:

Features
Class-D
1 Channel (Mono) Operation
Thermal Management Processor
Subsonic Filter
Bass EQ Circuit
Selectable Crossover (LP)
Adjustable Crossover (LP)
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
MOSFET Final Outputs
STAR Circuitry
Auto Over-Current Protection
Top Mounted Blue LED Power/Status Indicator
Gold Plated RCA Input Connectors
Continuously Adjustable Gain Control
Speaker Level Inputs
Gold Plated Power Screw Terminals
Gold Plated Speaker Terminals
Non-Fading Pre-Amp Output
Dual Sided Glass Epoxy PC Board
CEA-2006 Power Rating
CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 65dBA (Ref. 1W into 4Ohm): 220W x 1
RMS Power (at 14.4V THD+N, 20Hz-20kHz)
Per channel into 4 ohms: 220W x 1 (1% THD)
Per channel into 2 ohms: 400W x 1
Brigded 4 ohms: 600W x 1
Bass Engine¨ Sound Tuning
Crossover Frequency : 50Hz-200Hz,-24dB-oct (LP)
Subsonic Filter (Fixed): 15Hz
Bass EQ Frequency (Fixed): 50Hz 0 to +20dB
Dimensions
Heat Sink (WxHxD) in: 7-13/16¬ x 9-31/64¬ x 2-23/64¬
Heat Sink (WxHxD) mm: 198.6mm x 241mm x 60mm
Foot Print (WxHxD) in: 9-11/16¬ x 9-31/64¬ x 2-23/64¬
Foot Print (WxHxD) mm: 245.6mm x 241mm x 60mm
General
Power Requirements: 14.4V DC (11V to 16V)
Fuse Type: 20A x 2
Frequency Response: 20Hz - 200Hz (+3/-3dB)
Signal to Noise (S/N): 90dBA (Reference to Rated Power)
Input Sensitivity (For Rated Power): 0.2V to 4.0V (1.0 at Center Detent)
Input Impedance: 10k Ohm
Weight: 2.8 Kg.