• Car Audio » |  • Alpine Car Audio » |  • Amplifiers 4ch » |

Product Description:

FEATURES
4/3/2 Channel Operation
High Temperature Protection
Overcurrent Protection
Subsonic Filter
Bass EQ Circuit
Adjustable Crossover (HP/LP)
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
STAR Circuitry
Auto Over-Current Protection
MultiModeª
Top Mounted Blue LED Power/Status Indicator
Input Channel Selector
Gold Plated RCA Input Connectors
Continuously Adjustable Gain Control
Speaker Level Inputs
Gold Plated Power Screw Terminals
Gold Plated Speaker Terminals
4-Layer Glass Epoxy PC Board
SPECIFICATIONS
CEA-2006 Power Rating
CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 80dBA (Ref. 1W into 4Ohm): 70W x 4
RMS Power (at 14.4V THD+N, 20Hz-20kHz)
Per channel into 4 ohms: 70W x 4 (0.08% THD)
Per channel into 2 ohms: 140W x 4
Brigded 4 ohms: 350W x 2 (0.3% THD)
Bass Engine¨ Sound Tuning
Crossover Frequency : 50Hz - 400Hz HP/LP/Off(-12dB/oct)
Subsonic Filter (Fixed): 15Hz
Bass EQ Frequency (Fixed): 50Hz +12dB (Ch3/4) On/Off
Dimensions
Heat Sink (WxHxD) in: 11-15/64" x 9-31/64" x 2-23/64"
Heat Sink (WxHxD) mm: 285mm x 241mm x 60mm
Foot Print (WxHxD) in: 13" x 9-31/64" x 2-23/64"
Foot Print (WxHxD) mm: 332mm x 241mm x 60mm
General
Power Requirements: 14.4V DC (11V to 16V)
Fuse Type: 30A x 2
Frequency Response: 10Hz - 50kHz (+0,-1dB)
Signal to Noise (S/N): 100dBA (Reference to Rated Power)
Input Sensitivity (For Rated Power): 0.2V to 4.0V (1.0 at Center Detent)
Input Impedance: 10k Ohm
Speaker Impedance